GEORGE GEHRkES GINK HIN Decoder — MIC GGK

Hull Identification Numbers beginning with GGK were assigned by the US Coast Guard to GEORGE GEHRkES GINK of ASOTIN, WA. The company is recorded as out of business since 2003 — common for older hulls, and useful to know when hunting parts or records. Enter the full 12-character HIN below for build date, model year, and serial — free, no account.

MIC

GGK

Location

ASOTIN, WA

In business

since 1995

Status

Out of business (2003)

GEORGE GEHRkES GINK hulls (1995–2003) all use the current HIN format: a month letter (A=January…L=December), a certification-year digit, then two model-year digits.

How a GEORGE GEHRkES GINK HIN breaks down

A current-format (1984–present) Hull Identification Number is 12 characters. Using the example GGK45678D424 (illustrative):

CharactersSegmentIn exampleWhat it identifies
1–3Manufacturer (MIC)GGKIdentifies GEORGE GEHRkES GINK, assigned by the US Coast Guard.
4–8Hull serial number45678GEORGE GEHRkES GINK's own production number for the specific hull (the letters I, O, Q are never used).
9Certification monthDMonth built — A=January … L=December (D = April).
10Certification year4Last digit of the certification year.
11–12Model year24The boat’s model year.

Free · no account · the HIN is on the transom, upper starboard (right) corner

Buying this GEORGE GEHRkES GINK? Check it before you pay.

GEORGE GEHRkES GINK is recorded out of business (2003) — which affects recalls, parts support, and resale. The $9.99 Boat Report adds the full CPSC marine-recall check, a HIN consistency check, a verify-before-you-buy checklist, and the USCG builder record for this hull — one downloadable report, one-time, no subscription. See what's included

GEORGE GEHRkES GINK HIN FAQ

What does a GEORGE GEHRkES GINK HIN look like?

It starts with the three characters "GGK" — the Manufacturer Identification Code the US Coast Guard assigned to GEORGE GEHRkES GINK — followed by a 5-character hull serial and a 4-character date code, 12 characters total. GEORGE GEHRkES GINK hulls (1995–2003) all use the current HIN format: a month letter (A=January…L=December), a certification-year digit, then two model-year digits.

Is GEORGE GEHRkES GINK still in business?

USCG records list GEORGE GEHRkES GINK as out of business since 2003. That's common for older hulls — the HIN still decodes normally, and the out-of-business date helps date the boat and guides parts-hunting toward salvage and owner groups rather than a dealer network.

How do I decode the year on a GEORGE GEHRkES GINK HIN?

On current-format HINs the last two characters are the model year and the 9th–10th encode the certification month and year. GEORGE GEHRkES GINK hulls (1995–2003) all use the current HIN format: a month letter (A=January…L=December), a certification-year digit, then two model-year digits. Enter the full 12-character HIN above and the decoder works it out, including the legacy formats.

Where is the HIN on a GEORGE GEHRkES GINK boat?

On the outside upper-starboard (right) corner of the transom, within two inches of the top — required by 33 CFR 181.29. Since August 1984 an identical duplicate HIN is also molded into an unexposed interior location as an anti-theft measure. Both should match the title, registration, and insurance card exactly.

Is the "GGK" MIC the same as a GEORGE GEHRkES GINK serial number?

No. "GGK" is the Manufacturer Identification Code — characters 1–3 of the HIN — that identifies GEORGE GEHRkES GINK. The hull serial number is characters 4–8: GEORGE GEHRkES GINK's own production number for that specific boat (the letters I, O, and Q are never used). The full 12-character HIN combines the MIC, the serial, and the date code.

Can a GEORGE GEHRkES GINK HIN tell me the exact model?

Not on its own. A HIN encodes the builder, hull serial, certification month/year, and model year — not the model name or length. Match the decoded year and serial against GEORGE GEHRkES GINK records, the title, or a marine survey to confirm the exact model and configuration.

Other builders in WA

Sources: verified against the USCG Manufacturer Identification Code database (refreshed monthly) · HIN format per 33 CFR Part 181, Subpart C. Reviewed by Sam Reynolds, Lead Researcher, CarWhere. Cite this page: CarWhere, "GEORGE GEHRkES GINK HIN Decoder," carwhere.com/hin-decoder/ggk, last verified 2026-06-15.