OBD-II Code Lookup
Type any generic OBD-II code, such as P0420, or a few words like “catalyst efficiency”, to see what it means, which system it belongs to and whether it’s safe to keep driving. The search covers 9,123 standardized P, B, C and U codes and runs entirely in your browser.
Updated 2026-11-11 · By CarWhere Research · Code titles per SAE J2012 / ISO 15031-6
What the lookup covers
| Range | Area | Codes |
|---|---|---|
| P0xxx | Powertrain: engine, fuel, ignition, emissions, transmission (generic) | 3,554 |
| P2xxx | Powertrain extension range (generic) | 3,402 |
| P3xxx | P34xx cylinder deactivation (generic) | 76 |
| U0xxx | Network communication between control modules (generic) | 1,014 |
| U3xxx | Network: module power, wake-up and interlock circuits (generic) | 174 |
| C0xxx | Chassis: ABS, stability control, steering, suspension (generic) | 589 |
| B0xxx | Body: airbags, restraints, comfort and lighting (generic) | 314 |
Manufacturer-specific codes (a 1 as the second character, such as P1xxx) aren’t included because each automaker defines its own. The “can I drive” guidance in results is general, based on the system involved; 620 of the most-searched codes have a full guide written for that specific code.
New to trouble codes?
Learn how to read the five characters, find the diagnostic port and check pending vs. permanent codes in our OBD-II codes guide, or match a dashboard symbol in the warning lights guide.
Frequently asked questions
How do I look up an OBD-II code?
Read the code with an OBD-II scanner plugged into the 16-pin port under the dashboard, then type the five-character code (for example P0420) into the search box. You get the standard definition, the system it belongs to and general guidance on whether it is safe to keep driving. Common codes link to a full guide with causes, symptoms and fixes.
Why can’t I find my code?
This lookup covers generic codes, the ones whose definitions are standardized across all makes (a 0 as the second character, plus the P2, P34 and U3 ranges). Codes such as P1xxx, B1xxx, C1xxx or U1xxx are manufacturer-specific: each automaker defines them, so you need that make’s factory service information or a dealer-level scan tool.
Is the lookup the same as a diagnosis?
No. A code names the circuit or condition that failed a self-test, not the part to replace. The same code can come from wiring, a connector, a sensor or a mechanical fault, so testing confirms the cause before parts are bought.
Can I drive with the check engine light on?
If the light is steady, the car is usually drivable for a short time, but have it diagnosed soon. If the light is flashing, a misfire is damaging the catalytic converter right now: slow down and stop driving as soon as it is safe. Oil pressure, overheating, brake and steering warnings mean stop.
Where do the definitions come from?
Code numbers and short titles follow SAE J2012 and ISO 15031-6, the standards that define generic diagnostic trouble codes, as required for OBD-II under California and federal rules. We list only codes whose standardized titles are publicly documented; numbers we could not verify are left out rather than guessed.
Sources
- SAE J2012 — Diagnostic Trouble Code Definitions (standard code titles)
- ISO 15031-6 — Road vehicles: communication between vehicle and external equipment for emissions-related diagnostics, Part 6: Diagnostic trouble code definitions
- California Code of Regulations, Title 13, § 1968.2 — Malfunction and diagnostic system requirements (OBD II)
- U.S. EPA, 40 CFR 86.1806-17 — Federal onboard diagnostics requirements for light-duty vehicles
- California Air Resources Board — On-Board Diagnostic (OBD) Program
Code numbers and standardized short titles only; general guidance, not a diagnosis of your vehicle. Confirm with the factory service information for your year, make and model.