2010 Nissan Armada Recalls

Summary

NISSAN IS RECALLING CERTAIN MODEL YEAR 2010 NISSAN ARMADA VEHICLES MANUFACTURED FROM JUNE 7, 2010 THROUGH JUNE 11, 2010. THESE VEHICLES FAIL TO COMPLY WITH THE REQUIREMENTS OF FEDERAL MOTOR VEHICLE SAFETY STANDARD NO. 207, "SEATING SYSTEMS." THE SECOND ROW CENTER SEAT HINGE ASSEMBLY WAS MANUFACTURED OUT OF SPECIFICATION. THIS MAY PREVENT THE REAR CENTER SEATBACK FROM FULLY LOCKING IN THE IN-USE (UPRIGHT) POSITION.

Consequence

IN THE EVENT OF A CRASH, THE SECOND ROW CENTER SEAT MAY NOT FUNCTION PROPERLY INCREASING THE RISK OF INJURY TO THE SEAT OCCUPANT.

Remedy

DEALERS WILL INSPECT THE SECOND ROW CENTER SEAT HINGES/LOCK FOR PROPER FUNCTION. IF THE SEAT DOES NOT LOCK AS DESIGNED, THE SECOND ROW CENTER SEAT HINGE ASSEMBLY WILL BE REPLACED WITH A NEW ONE FREE OF CHARGE. THE SAFETY RECALL BEGAN ON AUGUST 30, 2010. OWNERS MAY CONTACT NISSAN AT 1-800-647-7261.

Summary

NISSAN IS RECALLING CERTAIN FRONT AND REAR LOWER LINKS, P/NOS. 54501ZQ00A, 54500ZQ00A, 551A1ZQ00A, 551A0ZQ00A , 54501EA00A, 54500EA00A, 551A1EA500, 551A0EA500, 54501ZR00A, AND 54500ZR00A, SOLD BETWEEN NOVEMBER 25, 2009 AND MAY 14, 2010 AS REPLACEMENT PARTS FOR MODEL YEAR 2004 THROUGH 2010 TITAN, ARMADA, AND QX56, AND MODEL YEARS 2005 THROUGH 2010 FRONTIER, XTERRA, AND PATHFINDER VEHICLES. THE LOWER CONTROL LINK ASSEMBLY HAS TWO CYLINDRICAL COLLARS FORMING THE INBOARD ATTACHMENT POINTS TO THE CHASSIS. DUE TO AN IMPROPER WELDING PROCESS SOME COLLARS MAY CONTAIN WELDS THAT DO NOT MEET STRENGTH SPECIFICATIONS.

Consequence

IF THE COLLAR WELD SEPARATES, THE VEHICLE HANDLING WILL DETERIORATE, POSSIBLY RESULTING IN A VEHICLE CRASH.

Remedy

NISSAN WILL NOTIFY OWNERS AND DEALERS WILL REPLACE ANY AFFECTED LOWER LINK FREE OF CHARGE. THE SAFETY RECALL BEGAN ON JULY 12, 2010. OWNERS MAY CONTACT NISSAN AT 1-800-647-7261.

Summary

NISSAN IS RECALLING CERTAIN MODEL YEAR 2008-2010 TITAN, ARMADA, AND INFINITI QX56, AND MODEL YEAR 2008-2009 NISSAN QUEST VEHICLES. THE BRAKE PEDAL PIVOT PIN END WAS NOT SPIN-FORMED TO SPECIFICATION DURING THE MANUFACTURING PROCESS OF THE BRAKE PEDAL ASSEMBLY. THE PIVOT PIN COULD SLIDE AND CAUSE THE BRAKE PEDAL TO PARTIALLY DISENGAGE FROM THE BRAKE PEDAL BRACKET.

Consequence

THE DRIVER WILL EXPERIENCE UNUSUAL AND NOTICEABLE LOOSENESS IN THE PEDAL AND A REDUCTION IN BRAKING FORCE INCREASING THE RISK OF A CRASH.

Remedy

DEALERS WILL INSPECT TO SEE IF THE PIVOT PIN HAD BEEN FORMED PROPERLY AND WILL REPLACE THE BRAKE PEDAL ASSEMBLY IF NECESSARY FREE OF CHARGE. THE SAFETY RECALL BEGAN ON MARCH 22, 2010. OWNERS MAY CONTACT NISSAN AT 1-800-647-7261.

Summary

NISSAN IS RECALLING CERTAIN MODEL YEAR 2010 TITAN, ARMADA, QX56, FRONTIER, XTERRA, AND PATHFINDER VEHICLES MANUFACTURED FROM NOVEMBER 19, 2009 THROUGH MARCH 3, 2010. THE LOWER CONTROL LINK ASSEMBLY HAS TWO CYLINDRICAL COLLARS FORMING THE INBOARD ATTACHMENT POINTS TO THE CHASSIS. DUE TO AN IMPROPER WELDING PROCESS SOME COLLARS MAY CONTAIN WELDS THAT DO NOT MEET STRENGTH SPECIFICATIONS.

Consequence

IF THE COLLAR WELD SEPARATES, THE VEHICLE HANDLING WILL DETERIORATE, POSSIBLY RESULTING IN A VEHICLE CRASH.

Remedy

NISSAN WILL NOTIFY OWNERS AND DEALERS WILL REPAIR THE VEHICLES FREE OF CHARGE. THE SAFETY RECALL BEGAN ON MAY 20, 2010. OWNERS MAY CONTACT NISSAN AT 1-800-647-7261.

Summary

Nissan North America, Inc. (Nissan) is recalling certain 2008-2011 Titan, Frontier, Xterra, Pathfinder, Armada, and 2008-2009 Quest vehicles. The resin emblem on the driver's air bag cover may develop cracks and detach during air bag deployment.

Consequence

A detached emblem can become a projectile during air bag deployment, increasing the risk of injury to vehicle occupants.

Remedy

Dealers will replace the driver’s airbag cover. Owner letters were mailed December 8, 2023. Owners may contact Nissan's customer service at 1-800-867-7669. Nissan's number for this recall are PC944, PC945, and PC946.